The addition of a new Axial Rotor with centralising paddles keeps the bale positioned in the centre of the feeding chamber to minimise wastage and provide better grip on soft bales.
Hustler’s proven polyethylene platforms with ribbed design keep bales tracking straight and with 30% less friction than steel it reduces drag on the bale which makes feeding out sticky bales easier and it will never corrode. The mounted Chainless bale feeders platform has been made wider to reduce waste with sloppy bales.
Easy Clean Hypaflo Wiper Panel
This minimises blockages and ensures that hay drops outside the wheel tracks to avoid being flattened into the mud. A quick-release latch releases the wiper panel for easy cleaning.
Sand Blasting & Armacote Finish
Hustlers’ unique oven-baked Armacote system is applied to a sandblasted finish ensuring long life, durability and a premium quality finish.
Quick Release Latch
A quick release latch releases the wiper panel for easy cleaning.
Many hours of research and development have gone into the shape of the teeth to makes them clean easier, and have more aggression on tight bales.
The Chainless Side Chute, deflects the hay into a trough or bunk. This only available on any of our Mounted Chainless Bale Feeder Range.
Tynes That Pierce The Bale
We’ve used specifically designed forged bale spears that pierce the bale rather than pushing it and are longer which reduces bale sag even with the wettest of bales, another innovation from Hustler.
High mounted connection latches on both sides of the feeder take the load off the cradle, which removes any load from the bale spears. This provides a more reliable, positive connection to handle the heavier bales. This has been tested to handle.
Unequal Length Tynes
We’ve made one tyne longer than the other for quick and easy alignment when reconnecting the cradle. You’ll only need to line up one tyne, then back straight in.
We’ve protected the motor from coming into contact with the tractor tyre, which can save you costly downtime and repairs when your tractor has short linkage arms.
Tie Point For Strings
We’ve included two grab bars, so you can tie the square bale strings to the platform. This saves the operator having to remove the strings before feeding out.
We’ve eliminated troublesome bushes from the drive system of the Mounted Chainless Bale Feeders, this reduces maintenance, increases service life, reduces the need for frequent greasing and saves you a whole lot of frustration.
Heavy Duty Latches
Built to take the heaviest of bales, and last longer with less wear.
Another industry first from Hustler! Quick coupling grips make connecting hoses easier and they are colour coded for easy coordination. Only available on the Mounted Chainless LX104 & LX105 Bale Feeders.
The headstock design allows for optional loader mounts to be bolted directly to the frame, allowing the feeder to be operated on a loader or telehandler. This provides hay and fuel savings when using the Mounted Chainless LX104 or LX105 Bale Feeder for feeding into bunks, TMR mixers, and hay rings.
The position of the new platform design is adjustable to suit any bale type you may need to feed out, from the worst of miss-shapen bales to the tightest-packed square bales, the Mounted Chainless Bale Feeder handles them with ease.
Increases bearing, sprocket and chain drives all designed to handle heavier bales, with less to maintain. Available only on the mounted Chainless LX105 Bale Feeder.
Monocoque Chassis Design
The Mounted Chainless LX105 square & round bale feeder with its huge new Monocoque Chassis is the toughest on the market and is now rated to handle 1250kg bales.