18" BY 20" LONG HYDRAULIC FOLDING CONVEYOR
The Model H-1000 Tub grinder is now equipped with a hydraulic folding conveyor. The 20’ long x 18” wide conveyor allows you to stack ground material up to 13’ 9” high at a
40 degree angle.
BIG BITE HAMMERMILL
The hammermill is constructed of 3/16” thick x 15 ¾” diameter plates with 15/16” case hardened rods that hold 64-3/8” hammers. These hammers have 4 hardened edges that can be rotated and flipped to get many hours of grinding.
EIGHT BELT DRIVE SYSTEM
The 8 multiple belt drive system is dependable. It supplies the power from the PTO of the tractor to the hammermill. This drive system turns the mill at approximately 2 x PTO speed. This mill speed provides for smooth feeding and delivers high capacity grinding performance.
HIGH-CAPACITY GRAIN GRINDING
High-capacity grain grinding is another important operation that the H-1000 can also accomplish. By placing the optional grain-grinding hopper over the hammermill opening and changing screens, the <br>H-1000 becomes a high capacity grain grinder for grinding and/or cracking feed grains.
The H-1000 tub is driven by hydraulic motor which drives a heavy-duty roller chain. The sprocket on the tub is a continuous sprocket that provides a responsive and smooth transmission of power to the tub.
The tub rotation is controlled by an electronic governor that stabilizes engine load by adjusting the tub speed. It also controls tub direction, clockwise, stop and counter-clockwise.
DUAL HIGH-CAPACITY AUGERS
The dual 9” high-capacity augers mounted in the belly pan, discharges the ground product to the stacking conveyor. The belly pan provides a clean area to catch & discharge small product such as ground corn & barley.
CONVEYOR DRIVEN BY POSITIVE MECHANICAL DRIVE
The Hydraulic folding stacking conveyor is powered by a positive mechanical drive system.
HEAVY-DUTY HIGH-CAPACITY TUB
The H-1000 Tub is constructed of a 10-gauge steel floor and a 14-gauge steel side wall. The width of the tub is 10’ 3” at the flare, 8’ at the base and 44 ½” deep. The H-1000 tub has the capacity to handle the largest round and square bales as well as loose hay.