Features
Engine Mount
The new engine mount has no moving parts for easy set up. The engine is leveled by the belt guard system which ensures perfect belt tension at every auger position - the separate leveling rod has been eliminated.
Wheel Spindles
The wheel spindles are now a bolt-on style, allowing easy set up and replacement. This also helps facilitate the auger mover installation.
Intake
The intake end of the auger flighting is supported by a wooden, self lubricating bushing, which is highly resistant to dirt contamination and is maintenance free.
Specifications
| Model | CX861 |
| Recommended hp (Engine) | 24 |
| Capacity (bu/hr) 1 | - |
| Rim size | 15" |
| Hub type | 5 bolt |
| Fuel tank capacity (US Gal) 2 | 6.5 |
| Lower tube reach 3 | 13' 2" |
| Maximum spout height | 42' 0" |
1 Capacity will vary with field conditions. Tested on wheat, - 12.5% moisture, using the CX1041 model.
2 Fuel tanks are supplied with engine configuration only.
3 Tube reach is measured along the auger tube, from the tip of the intake guard to the gear box on the engine drive configurations.
