The new engine mount has no moving parts for easy set up. The engine is leveled by the belt guard system which ensures perfect belt tension at every auger position - the separate leveling rod has been eliminated.
The wheel spindles are now a bolt-on style, allowing easy set up and replacement. This also helps facilitate the auger mover installation.
The intake end of the auger flighting is supported by a wooden, self lubricating bushing, which is highly resistant to dirt contamination and is maintenance free.
|Recommended hp (Engine)
|Capacity (bu/hr) 1
|Fuel tank capacity (US Gal) 2
|Lower tube reach 3
|Maximum spout height
1 Capacity will vary with field conditions. Tested on wheat, - 12.5% moisture, using the CX1041 model.
2 Fuel tanks are supplied with engine configuration only.
3 Tube reach is measured along the auger tube, from the tip of the intake guard to the gear box on the engine drive configurations.